Mini Crystal LED Strip Connector –Strip to Wires

Post Excerpt

Mini Crystal LED Strip Connector –Strip to Wires

Mini Crystal LED Strip Connector –Strip to wire

IP20 Mini Crystal Series

[table id=1 /]

Waterproof Series

[table id=2 /]

Specification for Mini Crystal LED Strip Connector

Strip to Wires （With wires) Series

Mini Crystal LED strip connector is a transparent PC material connector, mainly suitable for IP20 COB & SMD strip with matching pads. It has the characteristics of reliable connection, invisible seamless lighting, perfect solution for aluminum profile application, and DIY connection without stripping.

1. Naming Rule

2. Item No.

1# HR-S-SC-2PIN-5MM-B

Strip to 15cm Wires, mainly suitable for IP20 COB & SMD strips, 5mm width PCB, 15CM 22AWG Wires, 2PIN single color

9# HR-S-SC-2PIN-8MM-B

Strip to 15cm Wires, mainly suitable for IP20 COB & SMD strips, 8mm width PCB, 15CM 22AWG Wires, 2PIN single color

13# HR-S-SMD-3PIN-8MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 8mm width PCB, 15CM 20AWG Wires, 3PIN CCT color

17# HR-S-SMD-4PIN-8MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 8mm width PCB, 15CM 20AWG Wires, 4PIN RGB color

21# HR-S-SC-2PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 COB & SMD strips, 10mm width PCB, 15CM 22AWG Wires, 2PIN single color

25# HR-S-SMD-2PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 2PIN single color

29# HR-S-SMD-3PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 3PIN CCT color

33# HR-S-COB-3PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 COB strips, 10mm width PCB, 15CM 22AWG Wires, 3PIN CCT color

37# HR-S-COB-4PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 COB RGB strips, 10mm width PCB, 15CM 22AWG Wires, 4PIN RGB color

39# HR-S-SMD-4PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 4PIN RGB color

43# HR-S-SMD-5PIN-10MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 10mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color

47# HR-S-SMD-2PIN-12MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 2PIN single color

51# HR-S-SMD-3PIN-12MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires,3PIN CCT color

55# HR-S-SC-4PIN-12MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color

59# HR-S-SMD-5PIN-12MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color

63# HR-S-COB-5PIN-12MM-B

Strip to 15cm Wires, mainly suitable for IP20 COB strips, 12mm width PCB, 15CM 20AWG Wires, 5PIN RGBW color

67# HR-S-SMD-6PIN-12MM-B

Strip to 15cm Wires, mainly suitable for IP20 SMD strips, 12mm width PCB, 15CM 20AWG Wires, 6PIN RGBCCT color

3. Product advantages

High transparent PC material, good light transmission.

Guide slot introduction, anti-shake, more reliable fixed connection.

4. Instruction

(The picture shows the 2pin operation, refer to this The operation of 3~6pin products is the same.)

Prepare led strip

Cut the led strip along the pad

Prepare wires

Push the strip into the connectors

Use pliers to clamp the terminal to the level of the plastic surface , the operation is unilateral operation, clamp one side and then operate the other side.

Finished

Remark: After pressing in, the contact terminal is allowed to be 0.15 MAX higher than the plastic plane.

5. Technical Parameters

5.1 Product parameters

Rated Current: 6A Max
Rated voltage: 5V/9V/12V/18V/24V/36V/48V
Withstand voltage: 500V
Temperature resistance: 105℃
Working temperature: -20℃ ~ +80℃
Salt spray test: neutral salt spray 24H
Allowable humidity: 15%~90%
Applicable strip specifications: IP20 SMD & COB strip

5.2 Yiford PCB Circuit Laying Rules

（Before purchasing connectors, please ensure that the led strip meets the following wiring requirements. Customer complaints caused by PCB wiring problems are not covered by the warranty.）:

No.1 copper foil design needs to be laid in a straight line within this range;
No.2 Cut the middle line;
No.3 copper foil center distance design, the center symmetry with the outer width of the light strip is 0.2 Max;
No.4 light strip design thickness 0.30 Max
No.5 lamp beads allow the maximum height, the tolerance range is ±0.2;
No.6 total height after sticking adhesive: 0.55±0.1;
No. 7 Minimum size of lamp bead laying position;
No. 8 Design requirements for the outer width of the light strip;

All lamp beads and the outer width of the lamp strip have a center symmetry of 0.5 Max;